Skip to content
Free previewYou are reading 1 of 84 lessons, in the same interface members use. Everything else unlocks with full access.Get full access · $150

1.1.1 - Business Cycles and Economic Indicators

What you'll learn

  • Distinguish a change in the pace of growth from a turning point in the business cycle.
  • Calculate domestic output and explain how a trade deficit enters the calculation.
  • Interpret unemployment, participation and consumer price changes using the correct denominator.
  • Classify indicators by timing and explain why markets can move ahead of the economy.

Estimated reading time: 15 minutes.

WHY

Why it matters

A client hears that unemployment fell and assumes businesses must be hiring. A Series 65 question can turn on the same missing fact an adviser should ask about: did more people find work, or did fewer people keep looking? Interpreting an economic release starts with understanding what it counts.

KEY TERMS

Key terms

Aggregate activity
Economic activity across the economy, assessed through measures such as production, employment, income and sales.
Level
The amount measured at a point or over a period, such as a price index of 250 or annual output of $1 trillion.
Growth rate
The percentage change in a level over a stated interval.
Percentage point
The unit for subtracting two percentages. A rate that moves from 6% to 4% falls by 2 percentage points.
Index
A series expressed relative to a reference level. A reading of 120 on a base of 100 means the measured level is 20% above the base.
Seasonally adjusted
Adjusted for recurring calendar patterns, such as holiday hiring, to make changes between adjacent periods easier to interpret.
CORE

Core content

1.1.1.1 Locate the economy in the business cycle

Business activity fluctuates around its longer-term trend. Expansion and contraction describe intervals. Peak and trough name their boundaries. Those distinctions matter most near a reversal, when the economy can be weak by historical standards while its direction has already changed.

Follow one cycle starting with a manufacturer whose experience is shared across industries. See Fig 1.

Fig 1. From expansion to recovery
Key point: The turning point is identified by the change in direction on either side of it.
Expansion. Customers place larger orders, plants produce more, and employment and income generally rise. Firms can initially meet added demand using idle equipment.
Peak. Broad activity reaches a local high. Subsequent declines mark the end of the advance. Individual firms can reach their own highs in different months.
Contraction. Weak sales leave unwanted inventories. Businesses cut production and hours, and lost income can further weaken demand.
Trough. Broad activity reaches a local low before a sustained upturn. The following expansion begins while plants may still have spare capacity and joblessness may remain high.

Consider real output rising from 100 to 104 and then to 105. Growth slowed in the second interval, yet output reached its highest level of the three. Now consider output falling from 100 to 94 and then rising to 96 alongside improving income and sales. The economy has begun recovering before it regains 100. Neither the prior high nor any particular growth rate serves as a universal threshold for expansion.

In the United States, the National Bureau of Economic Research's Business Cycle Dating Committee evaluates the depth of a decline, its diffusion across the economy and its duration. A particularly deep, widespread drop can qualify even if it is brief. Two consecutive quarters of declining real gross domestic product are a familiar recession shorthand. The committee also examines monthly evidence and can date a recession without that exact sequence. Turning points are established retrospectively as evidence accumulates.

Match each observation to the part of the cycle it identifies.

Expansion:
Broad sales and production rise through an interval.
Peak:
The last high before a broad decline.
Contraction:
Broad income and production fall through an interval.
Trough:
The low from which sustained recovery begins.

A Checkpoint

Real output rises for a third quarter, this time by 0.4% after a 1.2% increase. Real income and sales also continue to rise. Which description fits?

  1. Expansion with slower output growth
  2. A peak in the level of real output
  3. Contraction with improving employment
  4. A trough followed by confirmed recovery
Answer: A. The latest quarter adds to output. The earlier quarter had faster growth, but a peak in the output level would require evidence of a subsequent decline.

B How much capacity is the economy using?

Potential output is an estimate of the real output an economy can sustain with its labor and capital. Suppose potential output stays at $20 trillion while actual real GDP rises from $19 trillion to $19.4 trillion. The economy produces more, and its shortfall narrows from $1 trillion to $0.6 trillion. Both observations can be true in an early recovery. To identify the direction of activity, compare actual output across periods. To identify the output gap, compare actual and potential output in the same period.

1.1.1.2 Measure domestic production and the trade balance

Gross domestic product (GDP) measures the market value of final goods and services produced within a country's borders during a period. Production in a foreign-owned factory in Ohio counts in U.S. GDP. Production abroad by a U.S.-owned factory counts in the country where it occurs. The word final prevents double counting: the price of a new car already incorporates the steel bought to build it.

GDP is a flow. An annual figure measures a year's production; accumulated national wealth is a stock measured at a point in time. In the expenditure formula, every input must cover the same period and use the same monetary units.

\[Y=C+I+G+(X-M)\]

Here \(Y\) is GDP, \(C\) is household consumption, \(I\) is gross private domestic investment, \(G\) is government consumption and gross investment, \(X\) is exports and \(M\) is imports. Table 1 shows how a single word in a transaction can change its treatment.

Table 1. Transactions and current U.S. GDP
TransactionExpenditure treatmentReason
A household pays for a haircutConsumptionA final service is produced this period.
A builder completes a new homeResidential investmentNew housing adds to the domestic capital stock.
A factory builds equipment for its own useBusiness fixed investmentProduction creates a productive asset.
A manufacturer adds unsold new cars to inventoryInventory investmentThe cars were produced this period.
A city pays a contractor to repair a bridgeGovernment purchasesThe city buys a current service.
A retiree receives Social Security benefitsTransfer payment, excluded directlyNo current product or service is exchanged for the payment.
An investor buys existing sharesAsset transfer, excluded directlyThe shares change owners; a separately earned brokerage fee is a current service.
A household buys a used carPrior production, excluded directlyA dealer's current service margin can still contribute to GDP.

Inventory accounting assigns production to the period in which it occurs. If a domestic manufacturer builds a car in December and a household buys it in January, the first period records inventory investment. In the second period consumption rises and inventories fall. These entries prevent a second count of the same car's production.

A What a deficit tells you

Exports are domestically produced goods and services bought abroad. Imports are foreign production bought domestically. Spending totals can already include imported products. Subtracting imports removes the foreign-produced portion. For example, a business buying imported machinery records investment spending and an offsetting import entry for the machinery's import value.

Net exports are \(X-M\). A negative result is a trade deficit; a positive result is a trade surplus. A trade balance covering goods alone can differ from one covering goods and services. A government budget deficit concerns public spending and receipts, a different pair of inputs.

Table 2 gives two hypothetical annual spending reports in billions of current dollars. Each column uses the same accounting basis.

Table 2. Domestic expenditure accounts
ComponentYear 1 ($ billions)Year 2 ($ billions)
Consumption620650
Gross private domestic investment170180
Government purchases210215
Exports100110
Imports130155

B Nominal and real growth

Nominal GDP values each period's output at that period's prices. Real GDP adjusts for price changes so that a comparison tracks changes in production volume. With the same goods produced in the same quantities, higher prices can raise nominal GDP while real GDP is flat. The GDP price deflator covers domestic final output, including exports. The consumer price index covers consumer purchases, including imported consumer goods. Their different coverage matters when the question supplies both indexes.

For any comparable series, let \(V_0\) be its starting level and \(V_1\) its ending level in the same units. Period growth in percent is \(100(V_1-V_0)/V_0\). A quarterly rate compares adjacent quarters. An annualized quarterly rate expresses the pace that would result if that quarter's growth continued for four quarters. A year-over-year rate compares the level with the same quarter one year earlier.

Worked case

A report gives nominal GDP of $1,000 billion in Year 1 and $1,050 billion in Year 2. The GDP deflator rises from 100 to 105. Consumer prices rise 3%. A client interprets the extra $50 billion as higher production. What happened to real GDP?

The question concerns domestic output, so use its deflator. With a GDP deflator on a base of 100, real GDP equals nominal GDP divided by the deflator and multiplied by 100. Year 1 gives \(1{,}000\times100/100=1{,}000\) billion base-period dollars. Year 2 gives \(1{,}050\times100/105=1{,}000\) billion in the same units. Real growth is zero. This is reasonable because the price measure and nominal GDP rose by the same proportion. Using consumer inflation would leave apparent growth that comes from applying the wrong basket.

C Choose the output measure that answers the question

Table 3 distinguishes three questions that an increase in reported GDP alone cannot answer.

Table 3. Interpreting an output headline
QuestionMeasureDecisive adjustment
How much real output is there per resident?Real GDP per capitaDivide real GDP by population.
What production income accrues to residents?Gross national product (GNP)Add residents' primary income from abroad to GDP and subtract nonresidents' primary income earned domestically.
Did stockbuilding accelerate?Change in inventory investmentCompare the amounts added to inventories in successive periods.

Per resident. Real GDP rises 2% while population rises 3%. The ratio of new to old real output per resident is \(1.02/1.03\), about 0.9903. Real GDP per capita fell about 0.97%. This average tells you how output compares with population growth. It cannot tell you whether the median household's income rose or how widely any gains were shared.

Income across borders. Suppose GDP is $500 billion, residents earn $30 billion in primary income abroad, and nonresidents earn $20 billion domestically. GNP is \(500+30-20=510\) billion dollars. A question about profits accruing to residents from an overseas affiliate calls for the income adjustment. Adding the affiliate's entire sales revenue would include amounts paid to its workers and suppliers.

Stockbuilding across periods. At unchanged prices, suppose inventories rise from $100 million to $110 million and then to $114 million. Inventory investment is positive in both periods, first $10 million and then $4 million. The inventory component therefore reduces the change in GDP by $6 million between periods, all else equal. The firm still has more goods on its shelves at the end.

D Read the estimate date

The U.S. Bureau of Economic Analysis (BEA) publishes quarterly GDP. Its advance estimate uses the information available first. The second and third estimates incorporate additional source data, and later updates can revise the series again. If the BEA revises a quarter's growth from positive to negative, it has changed its estimate of activity during that quarter. The revision date does not date a new decline.

1.1.1.3 Read employment counts and their denominators

The U.S. household survey assigns each person in the civilian noninstitutional population age 16 or older to one of three groups: employed, unemployed or outside the labor force. A person who works part time for pay counts as employed even if seeking full-time hours. A person with a job who is temporarily absent for a reason such as vacation generally counts as employed.

For a jobless person, availability and active search in the preceding four weeks generally establish unemployment. Sending an application or contacting an employer counts as active search. Merely reading job advertisements does not. A worker on temporary layoff expecting recall can count as unemployed without searching. A discouraged worker wants a job but has stopped looking because prospects seem poor. That worker falls outside the labor force.

Trace the classifications used to calculate the headline unemployment rate. See Fig 2.

Fig 2. Household employment classification
Key point: A change in search behavior can change labor force membership without creating a job.
flowchart TD
A[Eligible survey population] --> B{Employed during reference week?}
B -->|Yes| C[Count as employed]
B -->|No| D{Available for work?}
D -->|Yes| E{Active search or temporary layoff?}
D -->|No| F[Outside labor force]
E -->|Yes| G[Count as unemployed]
E -->|No| F

Let \(E\) be employed people, \(U\) unemployed people and \(P\) the eligible population, all measured in people. The labor force is \(L=E+U\). The headline unemployment rate is \(100U/L\); the participation rate is \(100L/P\); the employment-to-population ratio is \(100E/P\). Only the last two use the full eligible population as their denominator.

Worked case

A region has 1,000 eligible adults, 570 employed and 30 unemployed. Ten unemployed adults stop looking because no openings match their skills. Businesses advertise 12 vacancies, but nobody is hired. Does the reported decline in unemployment show that employment improved?

Initially the labor force is 600 and unemployment is \(100\times30/600=5.0\%\). The ten departing job seekers leave both the unemployed count and the labor force. The new rate is \(100\times20/590\approx3.39\%\). Participation falls from 60% to 59%. Employment remains 570, or 57% of the eligible population. The vacancies are unfilled, so adding 12 to employment would count intentions as hires. The lower unemployment rate reflects a smaller pool of job seekers.

The establishment survey measures nonfarm payroll jobs. Someone on two employers' payrolls can contribute two jobs to that survey and one employed person to the household survey. Self-employed people also help explain why the reports can differ: their work can qualify them as employed in the household survey without placing them on a nonfarm employer's payroll.

Table 4 distinguishes the cause of unemployment from a person's statistical classification.

Table 4. Sources of unemployment
TypeExampleWhat would address the cause?
FrictionalA qualified accountant searches after moving to another city.Time to match a worker with an available position
StructuralAutomation eliminates a job; nearby openings require different skills.Retraining or a change in the location or mix of jobs
CyclicalA hotel cuts staff as economy-wide demand for travel falls.A recovery in aggregate demand
SeasonalA resort closes at the end of ski season.Return of the regular operating season

Full employment can coexist with frictional and structural unemployment. Workers take time to find suitable openings and employers' skill requirements change even in a healthy economy. No fixed unemployment percentage identifies every economy's peak or trough.

A Checkpoint

A worker has no job, is available and expects recall from a temporary layoff. The worker has submitted no applications. How does the household survey generally classify this person?

  1. Employed because the prior employer expects to recall the worker
  2. Outside the labor force because there was no active search
  3. Unemployed under the temporary-layoff provision
  4. Employed part time until the recall date
Answer: C. Expected recall from temporary layoff permits unemployment classification without active search. B would fit an available jobless person who had stopped searching and did not qualify for that provision.

B Which labor measure captures unused hours?

The U.S. Bureau of Labor Statistics (BLS) publishes both the Employment Situation report and the CPI. Within the employment report, the headline unemployment measure is called U-3. A question about people who need more hours or recently stopped searching calls for the broader U-6 measure. Table 5 shows where the additional groups enter its calculation.

Table 5. People counted in U-6
GroupU-6 numeratorU-6 denominator
Unemployed peopleIncludedIncluded in the civilian labor force
Marginally attached workers, including discouraged workersIncludedAdded to the civilian labor force for this calculation
People employed part time for economic reasonsIncludedAlready included once as employed people

Marginally attached workers want and are available for work and looked for a job sometime in the preceding 12 months, though they did not search in the most recent four weeks. Part-time workers counted for economic reasons want and are available for full-time work but face circumstances such as reduced hours or an inability to find full-time work. Someone who freely chooses a shorter schedule belongs only in the denominator.

C Unpaid family work

A 19-year-old works 16 unpaid hours in a family member's store during the survey reference week and attends college the rest of the time. At least 15 hours of unpaid work in a family enterprise qualifies the student as employed. Ordinary unpaid chores at home do not qualify. The 15-hour test applies specifically to unpaid family workers. For work performed for pay or profit, even one hour during the reference week can qualify.

1.1.1.4 Interpret consumer prices and purchasing power

The Consumer Price Index (CPI) measures average price change for a weighted basket of goods and services bought by urban consumers. A category with a larger spending weight has more influence on the index for the same percentage price change. An individual household's experience can differ if, for example, it spends an unusually large share on rent. Headline CPI includes food and energy. Core CPI excludes both to help assess underlying price trends when those categories fluctuate sharply.

Compare index levels over the period named. A CPI increase from 250 to 260 is 10 index points but \(100(260-250)/250=4\%\) inflation. If inflation slows to 2% over the following year, the new level is \(260\times1.02=265.2\). Prices still rose. That is disinflation. A broad decline in the price level is deflation. A decline in the price of gasoline alone establishes neither condition for the overall basket.

Inflation changes what a fixed payment can buy. Let \(F\) be a future payment in dollars, \(P_0\) the starting CPI and \(P_1\) the CPI when payment is received. Purchasing power in starting-period dollars is \(F\times P_0/P_1\). For a $1,000 payment and a starting CPI of 250, an ending CPI of 260 leaves about $961.54 of starting purchasing power. Figure 3 lets you vary the payment while keeping the price comparison consistent.

Fig 3. Buying power of a fixed payment
Key point: The same dollar payment buys less as the consumer price level rises.
{"x":{"label":"Ending CPI (index points)","min":200,"max":320},"y":{"label":"Purchasing power (starting-period dollars)","min":0,"max":2000},"curves":[{"label":"Real payment","expr":"F*250/x"}],"sliders":[{"name":"F","label":"Nominal payment ($)","min":500,"max":1500,"step":100,"value":1000}],"readouts":[{"label":"Buying power at CPI 260 ($)","expr":"F*250/260","digits":2}],"try":"Predict how much buying power increases at CPI 260, then raise the payment from $1,000 to $1,100 to check.","say":"The curve slopes downward as the ending price index rises. Increasing the nominal payment raises the curve at every price level.","prompt":"a live graph of purchasing power (starting-period dollars) against ending CPI (index points). The curve shows real payment. The curve slopes downward as the ending price index rises. Increasing the nominal payment raises the curve at every price level. On the page, a slider changes the nominal payment ($), and the curve redraws as it moves. It also displays buying power at CPI 260 ($). Try this: Predict how much buying power increases at CPI 260, then raise the payment from $1,000 to $1,100 to check."}

For an investment, the exact real return is \((1+r)/(1+i)-1\), where \(r\) is nominal return and \(i\) is inflation over the same period, both entered as decimals. A nominal gain of 3% during 5% inflation gives \(1.03/1.05-1\approx-1.90\%\). Subtracting inflation from nominal return gives a useful approximation of negative 2%. The dollar balance grew while its purchasing power fell.

Prices and output answer different questions. With stagflation, the price level rises while real activity stagnates or weakens, often alongside elevated unemployment. For example, a broad increase in energy input costs can raise selling prices while making some production unprofitable. Rising CPI alone therefore cannot distinguish expansion from contraction.

A Identify the source of price pressure

Start with the event in the question. A price increase can begin with stronger spending, a loss of productive capacity or a rise in a producer's selling price that has yet to reach retail customers. Table 6 distinguishes these observations.

Table 6. Demand, supply and producer prices
ObservationTermWhat the evidence supports
Spending surges while factories are near capacity.Demand-pull inflationBuyers compete for output that producers have limited capacity to expand.
A widespread input shortage makes production more expensive.Cost-push inflationPrices can rise even as firms reduce output.
Domestic producers receive higher selling prices.Producer Price Index (PPI) increasePrices at the producer level rose across the measured basket.

Demand-pull. Suppose households increase purchases across industries while firms have ample idle capacity. Firms may initially fill extra orders by increasing output. If spending continues to grow faster than sustainable production, price pressure becomes more likely. The detail that favors demand-pull inflation is stronger aggregate spending relative to available supply. An increase in spending on one brand at a competitor's expense supplies little evidence of economy-wide pressure.

Cost-push. Suppose a disruption makes fuel scarce across industries while household demand initially holds steady. Producers face a higher cost per unit. Some raise prices, and some scale back production. Cost-push describes the source of the pressure. Stagflation describes the combination of inflation and stagnant or weakening activity that may follow. A question asking for the cause and one asking for the resulting economic condition can therefore have different answers.

Producer prices. PPI measures prices domestic producers receive for their output. A flour mill's selling price is a producer price even though flour is an input expense for a bakery. The bakery might absorb some of the increase in its profit margin, switch suppliers or raise its own prices. A rise in producer prices can signal pressure on consumer prices without establishing its timing or size.

B Take the borrower's side of a fixed payment

A borrower owes $10,000 in one year under a fixed nominal contract. Both parties expected stable prices. If the price level unexpectedly rises 10%, the payment has purchasing power of \(10{,}000/1.10\), about $9,091 in starting dollars. The lender receives less real value than anticipated, and the borrower's real repayment burden falls. Unexpected deflation reverses the effect. Check whether the contract indexes payments to inflation before applying this reasoning.

1.1.1.5 Separate current conditions from early and late signals

Classify an indicator by when it typically turns relative to broad economic activity. The publication date tells you when a report becomes available. The economic timing describes what its underlying series measures. Last month's industrial production remains evidence about activity in that month even when the release arrives several weeks later.

Table 7 compares measures that can tell different stories in the same release week.

Table 7. Indicator timing around a turning point
TimingCommon examplesEconomic connection
LeadingBuilding permits, manufacturers' new orders, broad stock pricesAuthorization, commitments and expectations can change before production does.
Leading, inverse directionInitial unemployment insurance claimsRising new claims can signal weakening demand for labor.
CoincidentIndustrial production, nonfarm payroll employment, real personal income less transfers, real manufacturing and trade salesThese measure production, jobs, earned income or sales occurring near the current phase.
LaggingUnemployment rate, average duration of unemploymentEmployers can wait for sustained demand before hiring, leaving job seekers unemployed after output turns up.

Quarterly real GDP is a broad measure of contemporaneous production. Its release delay and subsequent revisions affect how promptly investors can assess the economy. A leading series has a different limitation: a permit may never become a completed building, an order may be canceled and stock prices can reverse. Several independent signals sustained over time provide more persuasive evidence than a single month's movement.

The sequence for a homebuilder illustrates why evidence of future activity can coexist with weak current activity. See Fig 4.

Fig 4. A homebuilder responds to returning demand
Key point: A permit, work in progress and a later hire provide evidence about different stages of recovery.
Permit issued. The builder obtains permission for a project. Future activity is possible even though construction has yet to begin.
Work begins. Crews start foundations. Construction performed now adds to current production.
Existing crews work longer. The builder can increase output before adding workers to payroll.
Hiring follows. A sustained backlog justifies additional staff. Joblessness can persist during the earlier stages.

Timing and direction are independent. Building permits commonly rise ahead of stronger activity. Initial claims can also lead, but their decline generally suggests fewer new layoffs. Likewise, the payroll count and unemployment rate both describe labor, yet payrolls are commonly treated as coincident while the unemployment rate tends to lag.

A Connect the release to an investment question

Security prices reflect expectations about future cash flows and the rates used to discount them. Suppose investors expected industrial output to fall 4% and the reported decline was 1%. Output weakened, yet share prices might rise because expected profits now look better than previously feared. A release can also change interest rate expectations. Neither its sign nor its timing category dictates the next market return.

Demand for cyclical purchases such as vehicles and leisure travel can fall sharply when households postpone spending. Demand for defensive products such as basic groceries tends to be steadier. A defensive issuer can still lose value through high debt, rising costs or an expensive starting valuation. For a client with a near-term cash need, a positive leading indicator does not change when the money must be available. An adviser weighs the economic evidence alongside that horizon, liquidity need and capacity for loss.

See also. Monetary Policy and Fiscal Policy explains how policymakers respond to changing activity and prices. Yield Curves and Credit Spreads develops financial-market signals. Currency and Global Economic Risks connects currency movements with import costs and export demand.

B Distinguish closely related indicator names

Table 8 gives the timing of five series that can appear in questions about a possible turning point.

Table 8. Additional leading and lagging indicators
SeriesUsual timingReading near a slowdown
Average weekly manufacturing hoursLeadingFactories can shorten shifts before cutting jobs.
Consumer expectations for business conditionsLeadingA weaker outlook can precede a pullback in purchases.
Ten-year Treasury yield less the federal funds rateLeadingA negative spread places the long-term yield below the short-term rate.
Manufacturing and trade inventory-to-sales ratioLaggingUnsold goods can accumulate after demand weakens.
Average prime rate charged by banksLaggingBank lending rates can adjust after economic conditions change.

Hours and expectations. A manufacturer eliminates Friday overtime but keeps every employee. Average weekly hours already capture a change that the payroll count cannot yet show. Likewise, a household survey can register growing optimism about future business conditions while current sales remain unchanged. In a question about consumer surveys, look for a forward-looking expectations component before assigning the leading classification.

Two interest-rate clues. A ten-year Treasury yield of 4% and a federal funds rate of 5% give a spread of \(4\%-5\%=-1\) percentage point. This inversion can signal increased recession risk. It supplies neither a recession date nor a guaranteed outcome. The average prime rate is a different series. It measures a bank lending benchmark, and its conventional classification is lagging. The words spread and average prime rate identify different measurements even when both questions mention banks.

Inventories relative to sales. Suppose monthly sales fall from $50 million to $40 million while inventories remain $100 million. The inventory-to-sales ratio rises from 2 to 2.5 months of sales without another unit entering the warehouse. The higher ratio reveals how slowly existing stock is moving at the new sales pace. A question about this lagging ratio differs from a GDP question about the dollar value of newly accumulated stock.

C Recall check

Give the measurement rule behind each observation.

Which three features help distinguish a U.S. recession from a narrow slowdown?
The depth, diffusion and duration of the decline.
Where do newly produced goods enter GDP before sale?
An addition to business inventories counts as investment.
Which population is the denominator for labor force participation?
The civilian noninstitutional population age 16 and older.
Which two spending categories does core CPI exclude?
Food and energy.
What makes a delayed production report coincident?
The production it measures took place during the period whose activity is being assessed.
COMMON MISTAKE

Common mistakes

Use the distinction in the final column when two interpretations sound plausible.

Table 9. Similar headlines with different meanings
Tempting choiceWhy it sounds plausibleWhat settles it
A peak when growth slowsThe growth rate passed its high.The level of broad activity must turn downward.
GDP fell because the trade deficit widenedNet exports enter GDP with their sign.Domestic consumption, investment and government purchases can rise enough to offset the change.
A lower unemployment rate proves hiringFinding a job removes a person from unemployment.Leaving the labor force also removes a person from unemployment.
Deflation when positive inflation halvesThe reported percentage fell.Deflation requires a falling general price level.
An inverse indicator must lagIts movement looks inconsistent with an improving economy.Direction describes the sign; timing describes when it turns.
QUIZ

Self-check quiz

1. Using Table 2, which pair gives the change in nominal GDP and the change in the size of the trade deficit from Year 1 to Year 2?

  1. GDP rises $45 billion and the deficit widens $15 billion.
  2. GDP rises $30 billion and the deficit widens $15 billion.
  3. GDP rises $30 billion and the deficit narrows $15 billion.
  4. GDP rises $60 billion and the deficit widens $15 billion.

2. After several months of broad declines, real production, income and sales bottom in May and then rise through September. Unemployment reaches its highest rate in August. Which interpretation fits?

  1. The expansion began only after August.
  2. May was the peak because unemployment rose afterward.
  3. September was the trough because it had the highest recent output.
  4. May was the trough, and unemployment lagged the recovery.

3. CPI rises from 200 to 210 and then to 216.3 in successive years. Which statement describes the second year?

  1. Inflation slows to 3% and a fixed payment loses purchasing power.
  2. Deflation reaches 2% and a fixed payment gains purchasing power.
  3. Inflation rises to 6.3% and a fixed payment loses purchasing power.
  4. Inflation remains 5% and a fixed payment retains its purchasing power.

4. Initial unemployment claims fall and building permits rise for three months. Current production remains flat. A client wants to invest next month's tuition payment in a cyclical equity fund. Which response best interprets the evidence?

  1. Flat production makes the improvement in leading indicators irrelevant to the outlook.
  2. The combination confirms a current expansion and reduces the need for liquid funds.
  3. The figures suggest possible improvement, while the tuition deadline still governs liquidity needs.
  4. Falling claims indicate accelerating layoffs, making a broad contraction the most likely interpretation.

5. A household buys a new imported car for $30,000. Assume the entire price is import value and ignore domestic distribution services. What is the direct expenditure accounting effect?

  1. Consumption rises $30,000 and GDP rises $30,000.
  2. Consumption and imports each rise $30,000, leaving GDP unchanged.
  3. Imports rise $30,000 and GDP falls $30,000.
  4. Investment and imports each rise $30,000, leaving GDP unchanged.
ANSWERS

Answer key

Question 1 - Answer: B. Domestic spending rises $45 billion, while net exports move from negative $30 billion to negative $45 billion. GDP therefore rises $30 billion, from $970 billion to $1,000 billion. A omits the trade change from GDP, C reverses the deficit's direction, and D adds the deterioration to domestic spending growth.

Question 2 - Answer: D. May is the low separating the broad decline from the sustained increase. A dates production by a later labor reading, B calls a low a peak, and C assigns a trough to a high reading during recovery.

Question 3 - Answer: A. The first increase was 5%; the second is \(100(216.3-210)/210=3\%\). B mistakes slower inflation for falling prices, C treats the index-point increase as a percentage, and D carries forward the prior rate and overlooks the loss of buying power.

Question 4 - Answer: C. Both leading series support a possible improvement before production accelerates, and neither changes when tuition is due. A discards forward-looking evidence, B treats that evidence as confirmation and overlooks liquidity, and D reverses the meaning of falling initial claims.

Question 5 - Answer: B. Household consumption includes the car, and the import deduction removes its foreign production. A omits the import adjustment, C omits the household expenditure, and D treats a household vehicle as business capital.

RAPID

Rapid review

  • Peak or trough → name the boundary where broad activity reverses.
  • Positive but falling growth → the output level continues to rise.
  • Production location → determines whose GDP includes the output.
  • Imports exceed exports → net exports enter GDP as a negative amount.
  • Unemployment denominator → employed plus unemployed people.
  • Declining participation → some apparent labor improvement may reflect exits.
  • Slower positive inflation → purchasing power still falls for a fixed payment.
  • Permits, production, unemployment rate → leading, coincident and lagging, respectively.
  • Market reaction → compare the reported outcome with what investors expected.
  • Output below potential but rising → spare capacity can persist during recovery.
  • Population outpaces real GDP → average real output per resident falls.
  • Smaller addition to inventories → stockbuilding can subtract from growth while stocks rise.
  • Involuntary part-time work → included in the U-6 numerator and already in its denominator.
  • Unexpected inflation on fixed nominal debt → the borrower repays in dollars with less purchasing power.
  • Factory hours cut before layoffs → a leading labor signal can change while payrolls hold steady.

References

  • Series 65 Test Specifications. North American Securities Administrators Association, 2023.
  • Concepts and Methods of the U.S. National Income and Product Accounts. U.S. Bureau of Economic Analysis.
  • Handbook of Methods: Current Population Survey. U.S. Bureau of Labor Statistics.
  • Handbook of Methods: Consumer Price Index. U.S. Bureau of Labor Statistics.
  • Business Cycle Dating Procedure: Frequently Asked Questions. National Bureau of Economic Research.
End of your free lesson

Keep going with the full Series 65 Uniform Investment Adviser Law Exam Prep Course

You just studied the way members do, in the same lesson interface. Full access unlocks every lesson, the question bank and flashcards for a full year.

Up next with full access1.1.2 - Monetary Policy and Fiscal Policy

One payment per program